Wireless Utility Tailgate Spreader
Wireless Utility There’s no need to run an electrical harness from the spreader to the cab when using the SnowEx® SR-210 wireless tailgate spreader. Designed to handle bagged rock salt, this plug-and-play unit features a vertical high-flow auger with patented spinner motor for rock solid performance.
|Empty Weight||68 lb|
|Capacity (Volume)||3.0 cu ft|
|Capacity (Weight)||240 lb|
|Spreading Width||Up to 25'|
|Speed Control||On/off with 2 pre-set spinner speeds on a wireless controlled key fob|
|Wiring Harness||7-pin plug-to-plug in trailer outlet on hitch, no harness required|
|Frame||Powder coated steel|
|Hopper||One-piece LLDPE safety yellow poly|
|Motors||12-volt DC motor mounted in weather resistant enclosure|
|Spinner Drive Assemble||Maximum torque transmission with hardened-steel worm and bronze gear|
|Spinner||10" nylon/glass reinforced resin|
|Auger||3" vertical high-flow auger|
|Mounting||2" receiver hitch is standard|
A pocket-sized, wireless key fob offers two spinner speed settings for easy operation.
Vertical High-Flow Auger
Spread bagged rock salt accurately, thanks to the vertical high-flow auger.
Spreaders come standard with a 2-inch (51mm) receiver mount for convenient attachment to a variety of vehicles.
The spinner motor transmission is completely electric powered. It draws electricity from the vehicle and offers plenty of power to the spreader. Also, it’s protected from the elements by a sealed drive enclosure.
Mount Types & Accessories
Light-Duty Hitch Mount
Install spreaders on a 2-inch receiver hitch. (LDM-175)
Attach spreaders to the 3-point hitch of utility tractors. (TPM-175)
Drop Utility Mount
The Drop Utility Mount is a low-profile mount for utility vehicles. (DRM-175)
The Trailer Mount allows towing of select tailgate spreader models. (TLR-175)
Install spreaders to the back of utility vehicles. (Requires minimum bed length of 35 inches and minimum bed width of 47 inches.) (UTM-175)
Wireless Spreader Harness
Gives vehicles the ability to plug in the 7-pin connector of a wireless spreader. (D6068)
Helps prevent moisture contamination in spreading material. (WSC-020)