SnowEx Liquid Sprayers
AccuSpray™ VSS-2000/VSS-3000 Liquid Sprayer
AccuSpray™ VSS-2000/VSS-3000 Designed specifically for brine applications, these truck-mounted sprayers are quiet, easy to maintain and ideal for most off-road applications. These fully electric-powered units help contractors reduce salt usage while increasing their level of service.
Brochures & Media
|Empty Weight||450 lb||520 lb|
|Overall Width||82" boom||82" boom|
|Capacity (Volume)||200 gal||300 gal|
|Spray Width||Up to 25'||Up to 25'|
|Spraying Volume||20 gal per lane mile/acre at 10 mph||20 gal per lane mile/acre at 10 mph|
|Speed Control||On/off switch for each pump||On/off switch for each pump|
|Wiring Harness||Completely loomed with molded plugs||Completely loomed with molded plugs|
|Frame||Powder coated steel||Powder coated steel|
|Tank||One-piece LLDPE safety yellow poly tank with baffles||One-piece LLDPE safety yellow poly tank with baffles|
|Motors||12-volt direct-drive pumps||12-volt direct-drive pumps|
|Mounting||Straps included||Straps included|
|Cover||LLDPE cover over mechanical||LLDPE cover over mechanical|
Features & Accessories
The VSS-2000 and VSS-3000 sprayers feature three spray zones, which are individually powered by electric pumps. The multi-zone control turns each of these zones on and off for ground spraying, curb spraying or spot spraying.
Liquid surges place significant stress on the vehicle when stopping or turning. The baffled tanks reduce the impact, helping to prolong vehicle life.
Curb Spray Nozzles
The left and right ends of the boom include specialized curb spraying nozzles, allowing you to accurately target curb areas with brine.
The center boom nozzles are adjustable for three spray settings: triple stream, single stream or wide fan. These settings make the sprayers highly adaptable for a wide variety of conditions.
Hose Reel Kit
Adds spot spraying capabilities to the unit. Bolts directly to the sprayer frame and includes spray wand with 100-foot hose. (HRK-200)
Calcium Chloride Brine
Premium Branded Liquids
Viscous or tacky substances or those containing solid particles are not recommended as these will clog pumps and nozzles.
DO NOT USE any products containing petroleum or petroleum by-products of any kind. These destroy seals and will void warranty.