Low Profile Tailgate Spreaders
Low Profile Tailgate Spreader For the ultimate in convenience and performance, this line of Low Profile Tailgate Spreaders provides a clear view from the cab. Low Profile Spreaders are ideal for spreading #1 rock salt, calcium chloride and other de-icing materials. So when you’ve got slippery driveways and parking lots to control, and you don’t want bulky spreaders blocking the view, the difference is clear with FISHER.
Brochures & Media
FISHER snow plow and spreader whole goods are covered under Fisher Engineering’s “Two Year Warranty” policy. FISHER snow plow parts and accessories sold over the counter and the Homesteader™ snow plow are covered by a one-year warranty. All warranty requests must be handled through an authorized FISHER snow plow dealer.
|Model||Hopper Construction||Capacity||Dimensions Overall
L x W x H
|Motor||Spinner Size||Spreading Width||Materials||Vehicle Application|
|Polyethylene||5.00 cu ft||21" x 39" x 34"||75 lb
|1/3 HP||10"||3' - 30'||Salt||Vehicles with Class III hitch|
|Polyethylene||8.00 cu ft||19½"x 50½" x 35"||105 lb
|1/3 HP||10"||3' - 30'||Salt||Full Size Trucks|
|Polyethylene||8.50 cu ft||25" x 50" x 42"||131 lb
|1/3 HP||15"||3' - 30'||Salt||Full Size Trucks|
Low Profile Spreader Model 500
Designed for pickups or SUVs with a Class III trailer hitch. Class III receiver hitch mount is standard – no tools required to install or remove spreader. 5 cu. ft. capacity polyethylene hopper for long corrosion-free life. 12V DC motor inside a sealed housing in the hopper. Direct drive steel auger and agitator. 10” diameter polyurethane spinner for long life performance. Standard nylon ratchet straps for added stability. Optional top screen and adjustable deflector.
Low Profile Spreader Model 1000
8 cu. ft. capacity poly hopper for long corrosion-free life. 12V DC motor inside a sealed housing in the hopper. Direct drive steel auger and agitator. 10” diameter polyurethane spinner for long life performance. Optional top screen, adjustable deflector and truck deflector flap.
Low Profile Spreader Model 1000 Mount Options
The Low Profile Spreader Model 1000 mounting options include fixed mount, Dual Swing Mount (shown) or Class IV receiver hitch mounts.
Low Profile Spreader Model 2500
Class IV receiver hitch mount is standard. 8.5 cu. ft. capacity low-profile high-density polyethylene hopper for long corrosion-free life. 12V DC high-torque motor mounted inside a sealed housing in the hopper for corrosion protection. Adjustable feed gate with positive material flow shut-off. Adjustable material deflectors. Large 15” polyurethane spinner. Molded polyethylene cover. Nylon ratchet straps.
The Model 2500 Flow Control System
Specialized feed gates and auger design combine to deliver complete and reliable flow control, eliminating material spillage and waste. Feed gates are stainless steel with an added powder coated finish for 2x the corrosion protection. Adjustable feed gates are located above the auger to deliver positive shut-off and absolute control over material distribution. “Saw tooth” feed gate design cuts through material in the gate, resulting in easy operation and complete material shutoff. A 3-flight auger traps material more effectively, resulting in less material spillage, even if feed gates are left open when traveling from job to job. An optional 5-flight auger provides maximum control over small pelletized material.
The Low Profile Spreader control includes in-cab “on/off” blast switch and variable speed control, for all three models.